皮卡车改装——后厢平盖

2010-12-19    分类:皮卡车改装    5人评论102,388次浏览

皮卡车改装后盖   皮卡车改装货箱宝

皮卡后厢平盖特别说明:
Pickup bed special instructions  cover

皮卡后箱采用平盖的封闭改装形式在国外已应用多年,尤其是在美国和拉美地区以及中东地区的皮卡车上的应用非常普遍。国内自去年底才开始有相关的皮卡后箱平盖产品问世。
Pickup bed cover is modified form of the closed flat cap has been applied in foreign countries for many years, especially in the U.S. and Latin America and the Middle East was very common car pickup. China began since the end of the pickup after the relevant boxes flat cover products available.

考虑到平盖的自身重量因素,皮卡后箱平盖通常采用玻璃钢或者ABS塑料制作。从同类平盖产品的重量来看,两者差距不大。但玻璃钢平盖的使用寿命较ABS塑料制品长一倍,正常使用寿命可达六年,几乎等同于皮卡整车的使用寿命,且平盖的承载力较好,可达300公斤不变形。现在国内市场上推出的皮卡后箱平盖产品均为玻璃钢制品。

Taking into Pickup bed cover of its own weight factor, pickup bed cover is usually by flat fiberglass or ABS plastic production. Cover products from the same weight level point of view, the difference is not.However, the service life of FRP flat covers over twice the length of ABS plastic, the normal life of up to six years, almost equivalent to the life of the vehicle pickup, and the better the bearing capacity of flat lid, up to 300 kg is not deformed. Now the domestic market after the launch of the pickup bed cover products are glass flat steel products.

皮卡车后厢平盖图片:
皮卡车后厢平盖

后厢平盖



转载请注明:皮卡车大全 » 皮卡车改装——后厢平盖

本文作者:皮卡车大全网

皮卡车大全,关注国内外皮卡车!

继续查看有关 的文章

5访客评论

  1. 我要加装后箱平盖

    黄大海06-10 21:57 回复
    • 留下联系方式,会有专员与您联系。

      admin06-10 22:03 回复
  2. 怎么国内就没见一家生产像东风猛士、悍马H1一样的带坡面的皮卡后箱盖?

    shaw peak12-17 20:55 回复
    • 在国内确实没看到过斜面的后箱盖,根据可靠消息,华豫可能近期会推出这种的。敬请关注!

      admin12-20 11:22 回复

我来说说

*

*

取消

...

无觅相关文章插件,快速提升流量